HI983307-01Pronto EC In-line Meter with LCD and Alarm

SKU : 1663411b3ad2

Pemesanan dapat melalui :
SKU 1663411b3ad2 Kategori :
Share this :

Deskripsi

 

The HI983307 is supplied with a direct two pin probe and 2 m (6.6’) cable with a ½” thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C (41 to 122°F) with a ? of 2% per degree.

In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual one-point calibration. The electrical circuitry is tightly sealed inside the water-resistant enclosure. This EC monitor can be installed anywhere quickly and easily with the casings molded eye. The 12 VDC power supply allows continuous monitoring over extended periods of time.

 

 

Specification NameDetail
SKUHI983307
EC Range0.00 to 9.99 mS/cm
EC Resolution0.01 mS/cm
EC Accuracy±2% F. S.
EC Calibrationmanual, one-point, through trimmer with HI70039
EC/TDS Temperature Compensationautomatic, 5 to 50°C (41 to 122°F) with ?=2%
Setpoint0.70 to 3.50 mS/cm
Alarmred LED blinks when measured value differs from set point more than ±0.20 mS/cm
EC/TDS ProbeHI7632/2 with 2 m (6.6’) cable and ½” thread for in-line installation
Power Supply12 VDC adapter (included)
Environment0 to 50°C (32 to 122°F); RH max 100%
Dimensions86 x 110 x 43 mm (3.4 x 4.3 x 1.7’’)
Weight215 g (7.6 oz.)
Ordering InformationSupplied with HI7632/2 EC/TDS probe, calibration screwdriver, 12 VDC adapter and instructions.
Warranty 1 year