Meat pH Tester with Built-in Specialized Electrode

SKU : 5fda8fb77659

Accurate and easy to use, the HI981045 pH Tester is ideal for pH measurement during meat processing and is designed to be used withFC097, a high-grade stainless-steel blade.The FC097 blade is sold separately.

  • ±0.05 pH accuracy
  • Comes with all the necessary solutions and batteries—everything you need to get started measuring right away.
  • Specialized electrode for spot checking the pH during meat processing.
Pemesanan dapat melalui :
SKU 5fda8fb77659 Kategori :
Share this :

Deskripsi

FC097-Meat-Tester-HALO2-Blade_Angle_720x720

 

Compatible with FC097 Removable Meat Blade

The tester is compatible with the separately-sold FC097 removable meat blade accessory (with o-ring). The design features a 25-mm (0.98″) blade-cutout opening for direct contact with the sample. This design is suitable for processes that need to comply with food-hygiene and Hazard Analysis Critical Control (HACCP) regulations.

Conical Tip Design

The conical tip design allows for easy penetration into solids and semisolids, which is needed when wanting to take a direct measurement in meat.

HI981045-Meat-Tester-with-Thread-Blade_720x720

 

pH Electrode with Replaceable Bridge Electrolyte

The pH electrode has an outer junction sleeve that can be removed and cleaned. Once cleaned a small amount of supplied gel electrolyte is added and the junction is refreshed improving the pH measurement and extending the life of the meter.

PVDF Body

Polyvinylidene Fluoride (PVDF) is a food grade plastic that is resistant to most chemicals and solvents, including sodium hypochlorite. It has high abrasion resistance, mechanical strength, and resistance to ultraviolet light. PVDF is also resistant to fungal growth.

Low Temperature (LT) Glass

The pH glass tip uses a special LT glass formulation suited for fast stabilization and accurate results at lower temperatures in order to have the ideal resistance for the measuring circuit.

Additional Features-at-a-glance

 

Large LCD Display

An enhanced LCD displays the measurement reading, stability indicator, low battery indicator, and calibration tags.

Automatic Calibration

These testers are calibrated automatically to one or two points. The calibration buffers are automatically recognized and after calibration the buffer values used are shown on the display.

Stability Indicator

An hourglass indicator is displayed on the LCD until a stable reading is obtained. Once a reading stabilizes, the indicator disappears and a reading can be taken.

Automatic Shut-Off Feature

These testers can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the tester is left on. The auto-off feature can also be disabled.

Probe Diagnostic

During calibration the meter will display an error (Err) message as an indicator that the probe needs to be cleaned.

Long Battery Life

These testers have an exceptional battery life of approximately 800 hours. When the battery power is running low, the low battery indicator blinks.

 

 

 

Specification NameDetail
SKUHI981045
pH Ranges0.00 to 12.00 pH
pH Resolution0.01 pH
pH Accuracy (@25°C/77°F)±0.05 pH
pH CalibrationAutomatic, one or two-point
pH Temperature CompensationAutomatic, 0 to 50°C (32 to 122°F)
Automatic Shut-Off8 minutes, 60 minutes, or disabled
Battery Type / LifeCR2032 Li-ion / approx. 800 hours of continuous use
Environment0 to 50°C (32 to 122°F); RH 95% max
Dimensions51 x 148 x 21 mm (2 x 5.8 x 0.9″)
Weight45 g (1.58 oz.)
Ordering InformationHI981045 (with thread) is supplied with pH 4.01 buffer solution, 20 mL sachet (2 pcs.), pH 7.01 buffer solution, 20 mL sachet (2 pcs.), electrode cleaning solution for meat, grease, and fats, 20 mL sachet (2 pcs.), electrode storage solution, 13 mL dropper bottle, gelled bridge electrolyte, 13 mL dropper bottle, 3V Lithium battery – CR2032, instrument quality certificate, and instruction manual.
Warranty1 year