Name: PAT Tester PCE-ET 5000
Brand: PCE-Instruments
SKU: 77838
Availability: InStock
Rating: 5 (1 reviews)

PAT Tester PCE-ET 5000 adalah alat ukur grounding serbaguna yang dirancang untuk melakukan berbagai pengukuran resistansi dengan akurasi tinggi. Alat ini mampu mengukur resistansi tanah, konduktor proteksi, dan sistem penangkal petir, menjadikannya solusi lengkap untuk inspeksi kelistrikan dan keselamatan. Dengan fitur memori internal, hasil pengukuran dapat disimpan dan diunduh ke PC untuk analisis lebih lanjut, memudahkan proses dokumentasi dan pelacakan data. Desainnya yang portabel dilengkapi baterai memungkinkan penggunaan di lapangan tanpa bergantung pada sumber daya listrik eksternal.

Prinsip kerja PAT Tester ini didasarkan pada pengukuran resistansi 2- atau 4-kutub, dilengkapi dengan deteksi terminal otomatis untuk meminimalkan kesalahan pengukuran. Alat ini secara visual dan akustik memberi tahu pengguna jika terjadi kesalahan koneksi, memastikan kalibrasi standar sebelum pengukuran dimulai. Grounding meter ini juga dilengkapi backlight dan indikator visual untuk memudahkan operasi dalam kondisi cahaya rendah. Dengan kabel dan spike tanah yang termasuk dalam paket, pengukuran resistansi tanah dapat dilakukan dengan cepat dan efisien.

Aplikasi utama alat ini mencakup industri manufaktur, fasilitas pendidikan, dan infrastruktur komersial yang memerlukan inspeksi rutin sistem grounding dan penangkal petir. Pengguna dapat memverifikasi apakah sistem proteksi petir berfungsi optimal dengan mengukur resistansi konduktor dan memastikan aliran arus petir ke tanah tidak terhambat. Selain itu, fitur pengujian tegangan gangguan dan frekuensi membuatnya cocok untuk diagnosa masalah kelistrikan di lingkungan industri.

Kemudahan penggunaan menjadi salah satu keunggulan PAT Tester ini, berkat antarmuka yang intuitif dan panduan koneksi otomatis. Alat ini juga mendukung pengukuran protektif seperti konduktor grounding dan koneksi listrik umum, memastikan kepatuhan terhadap standar keselamatan. Dengan baterai isi ulang dan opsional daya eksternal, alat ini siap digunakan dalam berbagai kondisi lapangan tanpa khawatir kehabisan daya.

Dilengkapi aksesori lengkap seperti kabel uji, penjepit buaya, dan terminal tegangan, PAT Tester PCE-ET 5000 siap digunakan langsung setelah dibuka dari kemasan. Alat ini ideal untuk teknisi lapangan, inspektor keselamatan, atau engineer yang membutuhkan alat ukur grounding andal dengan fitur canggih. Kombinasi antara portabilitas, akurasi tinggi, dan fitur keamanan membuatnya menjadi investasi berharga untuk menjaga keandalan infrastruktur listrik dan proteksi petir. Untuk informasi lebih lanjut dan konsultasi gratis mengenai produk ini, hubungi kami di WhatsApp 6285717112222 atau email contact@alat-test.com. Kami menyediakan pengiriman cepat dengan kualitas terjamin dan harga kompetitif.

– Mobile use thanks to battery and batteries – Data memory for later analysis on the PC – Visual connection aid for easy operation – Alarm in case of incorrect connection of the measuring line – Direct and indirect resistance measurement – Interference currents, interference voltages, frequencies

3-pole earth resistance
Test voltage	20, 48V AC
Test frequency	94 Hz, 105 Hz, 111 Hz, 128 Hz, AFC
Short circuit current	250-mA
Test time	26 seconds
Probe resistance Rs	<100 kΩ
Auxiliary earth resistance Rh	<100 kΩ
Resolution	0.001 Ω
Measuring range Re	0.02 Ω … 300 kΩ
Accuracy	± (5% + 10 digits)
Ust	< 24V
Fst	16 … 400 Hz

The accuracy is ensured in an environment of 0 … 28°C / 32 … 82°F, < 80% RH (non-condensing). Response time < 15 seconds (Time required to reach the specified accuracy, after the start of the measurement with the average function switched off.)

4-pole grounding resistor
Test voltage	20, 48V AC
Test frequency	94 Hz, 105 Hz, 111 Hz, 128 Hz, AFC
Short circuit current	250-mA
Test time	30 seconds
Probe resistance Rs	< 100 kΩ
Auxiliary earth resistance Rh	< 100 kΩ
Resolution	0.001 Ω
Measuring range Re	0.02 Ω … 300 kΩ
Accuracy	± (5% + 10 digits)
Ust	< 24V
Fst	16 … 400 Hz

The accuracy is ensured in an environment of 0 … 28°C / 32 … 82°F, < 80% RH (non-condensing). Response time < 25 seconds (Time required to reach the specified accuracy, after the start of the measurement with the average function switched off.)

3-pole earth resistance with current clamp
Test voltage	20, 48V AC
Test frequency	94 Hz, 105 Hz, 111 Hz, 128 Hz, AFC
Short circuit current	250-mA
Test time	26 seconds
Probe resistance Rs	< 100 kΩ
Auxiliary earth resistance Rh	< 100 kΩ
Resolution	0.001 Ω
Measuring range Re	0.02 Ω … 20 kΩ
Accuracy	± (5% + 10 digits)
Ust	< 24V
Fst	16 … 400 Hz

The accuracy is ensured in an environment of 0 … 28°C / 32 … 82°F, < 80% RH (non-condensing). Response time < 25 seconds (Time required to reach the specified accuracy, after the measurement has started with the average function switched off.) If the current on the current probe is too low, the measurement can be aborted.

4-pole earth resistance with current clamp
Test voltage	20, 48V AC
Test frequency	94 Hz, 105 Hz, 111 Hz, 128 Hz, AFC
Short circuit current	250-mA
Test time	26 seconds
Probe resistance Rs	< 100 kΩ
Auxiliary earth resistance Rh	< 100 kΩ
Resolution	0.001 Ω
Measuring range Re	0.02 Ω … 20 kΩ
Accuracy	± (5% + 10 digits)
Ust	< 24V
Fst	16 … 400 Hz

The accuracy is ensured in an environment of 0 … 28°C / 32 … 82°F, < 80% RH (non-condensing). Response time < 25 seconds (Time required to reach the specified accuracy, after the measurement has started with the average function switched off.) If the current on the current probe is too low, the measurement can be aborted.

Grounding resistor only with current clamps
Test voltage	48V AC
Test frequency	94 Hz, 105 Hz, 111 Hz, 128 Hz, AFC
Short circuit current	250-mA
Test time	26 seconds
Measuring range Re	0.02 Ω … 150 Ω
Resolution	0.001 Ω
Accuracy	± (5% + 10 digits)
Ust	< 24V
Fst	16 … 400 Hz

The accuracy is ensured in an environment of 0 … 28°C / 32 … 82°F, < 80% RH (non-condensing). Response time < 25 seconds (Time required to reach the specified accuracy, after the measurement has started with the average function switched off.) If the current on the current probe is too low, the measurement can be aborted.

Soil resistance (removal resistance)
Test voltage	20, 48V AC
Test frequency	94 Hz, 105 Hz, 111 Hz, 128 Hz, AFC
Short circuit current	250-mA
Test time	26 seconds
Resolution	0.001 Ω * m
Measuring range Re	0.02 Ω … 1000 kΩ * m
Accuracy	± (5% + 10 digits)

2-pole resistance measurement (AC)
Test voltage	20V AC
Test frequency	94 Hz, 105 Hz, 111 Hz, 128 Hz, AFC
Short circuit current	250-mA
Test time	26 seconds
Measuring range Re	0.02 Ω … 300 kΩ
Resolution	0.001 Ω
Accuracy	± (5% + 10 digits)
Ust	< 24V
Fst	16 … 400 Hz

2-pole resistance measurement (DC)
Test voltage	20V DC
Short circuit current	250-mA
Test time	26 seconds
Measuring range Re	0.02 … 3 kΩ
Resolution	0.001 Ω
Accuracy	± (5% + 10 digits)
Ust	< 3V
Fst	16 … 400 Hz

4-pole resistance measurement (DC)
Test voltage	20V DC
Short circuit current	250-mA
Test time	26 seconds
Measuring range Re	0.02 Ω … 3 kΩ
Resolution	0.001 Ω
Accuracy	± (5% + 10 digits)
Ust	< 3V
Fst	16 … 400 Hz

Line compensation
Test voltage	20, 48V AC
Test frequency	94 Hz, 105 Hz, 111 Hz, 128 Hz, AFC
Short circuit current	250-mA
Test time	26 seconds
Resolution	0.001 Ω
Measuring range Re	0.02 Ω … 30 Ω
Accuracy	± (3% + 10 digits)
Ust	< 24V
Fst	16 … 400 Hz

Interference voltage
Measuring range	± 50V DC
	1 … 50V AC
Resolution	0.1V
Accuracy	± (5% + 5 digits)

Interference current
Measuring range	20-mA … 2 A
Resolution	1-mA
Accuracy	± (5% + 5 digits)

Interference frequency
Measuring range	16 … 400 Hz
Resolution	1 Hz
Accuracy	± (1% + 10 digits)

Other specifications
Data storage	100 readings
Operating conditions	0 … 40°C / 32 … 104°F, < 80% RH (non-condensing)
Charge ambient conditions to the battery	10 … 40°C / 50 … 104°F, < 80% rh (non-condensing)
Storage conditions	-10 … 50°C / 50 … 122°F, < 90% rh (non-condensing)
Storage conditions for the battery	-20 … 30°C / -4 … 86°F, < 80% rh (non-condensing)
Storage height	< 12,000 m / 39,370 ft
Operating altitude	< 2,000 m / 6,561 ft
Clamp diameter	51 mm
Display	Backlit LCD, 9,999 digits
Display measuring range exceeded	> LIMIT
Display below measuring range	–
Measuring frequency earthing resistance / leakage current	1 Hz (If the average value function is activated: one value every four seconds)
Measuring frequency voltage measurement	2 Hz
Measuring frequency interference voltage	4 Hz
Measuring frequency interference frequency	1 Hz
Measuring frequency interference current	1 Hz
interfaces	Measuring connection: E, ES, S, H, pliers connection USB-B, charging connection
Power supply batteries	6 x 1.5V D LR14 batteries
Power supply battery	1 x 7.2V nickel-metal hydride battery pack
Power supply power supply	Primary: 100 … 240V, 50 … 60 Hz
	Secondary: 12V, 3A
Max. Power consumption with power supply	15V A
Max. Power consumption with battery or rechargeable battery	6V A
Running time in battery mode	About 5 hours
Running time in the battery	About 9 hours (without backlight)
Maximum input voltage
Maximum input voltage relative to earth	300V rms (CAT III)
Insulation thickness	6880V AC: 15 seconds
Overvoltage protection	250V AC between the connections
Dimensions	260 x 125 x 280 mm / 10.2 x 4.9 x 11 in
Weight	About 2.5 kg / 5.5 lbs
Standardize	Safety: EN61010-1: 2001, EN61010-031: 2002
	Pollution degree 2, CAT III 300V,
	EMC: EN61000-3-2: 2000, IEC61326-1: 1997 A

1 x PAT Tester PCE-ET 5000 4 x Crocodile clips 1 x Power supply 1 x USB cable 4 x Test cable 1 x Voltage terminal cable 1 x Power terminal cable 6 x 1.5V C batteries 2 x Current clamps 1 x Rechargeable Ni-MH battery 4 x Insert samples 1 x User manual