The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.
All these instruments run on a 12V adapter so there’s no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.
TDS – PPM Monitor
- User selectable Hi/Low Set Point
- Manual 1 point calibration
- Visual LED alarm
- Supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution
- Power Supply: 12 VDC adapter (included)
- Mounting kit (Included)
- Dimensions: 5.9 x 3.2 x 1.35 inches (148.5 x 82.5 x 32 mm
- Weight: 6.3 ounces (180 g) (meter only)
| Range | 0 – 1990 ppm |
| Resolution | 10 ppm |
| Accuracy | ±2% Full Scale |
| Setpoint range | 700 – 1800 ppm |
| Calibration | Manual 1 point |
| Alarm | Active when reading is higher or lower than set point |
| Probe | MA812/2 (included) |
| Thomas No | Mfr No | Description |
|---|---|---|
| 1188H81 | MC410US | TDS Monitor, Range: 0 – 1990 ppm |
