Yamato DNF Programmable Forced Convection Oven 27L 115V
Yamato Scientific DNF301
Yamato DNF Series Energy Saving & Air Velocity Controllable Forced Convection Ovens High-performance, energy-saving, programmable constant temperature, forced convection ovens with air velocity control and exhaust dampers. The first 2 in 1 system in the industry! Performance and Functions
|
Specifications | ||||||
Models | DNF301 | DNF401 DNF411 | DNF601 DNF611 | DNF811 | DNF911 | |
Circulation Method | Forced convection + Natural convection | Forced convection | ||||
External Temp. Range | 5~35°C | |||||
Temperature Set Range | 0~130°C (Wind velocity: 0), 0~270°C (Wind velocity: 1~10) | 0~270°C (Wind velocity: 1~10) | ||||
Temperature Control Range | RT +25~120°C (Wind velocity: 0), RT +15~260°C (Wind velocity: 1~10) | RT +15~260°C (Wind velocity: 1~10) | ||||
Temp. Control Accuracy *¹ | Forced convection | ±0.3°C (at 260°C) | ||||
Natural convection | ±0.5°C (at 120°C) | ±0.3°C (at 120°C) | Not applicable | |||
Temp. Fluctuation *¹ | Natural convection | ±0.5°C (at 260°C) | ||||
Forced convection | ±1.0°C (at 120°C) | ±0.8°C (at 120°C) | ±0.6°C (at 120°C) | Not applicable | ||
Temp. Distribution Precision *¹ | Forced convection | ±2.5°C (at 260°C) | ||||
Natural convection | ±5°C (at 120°C) | ±3°C (at 120°C) | Not applicable | |||
Temp. Gradient *¹ | Forced convection | 5°C (at 260°C) | 7°C (at 260°C) | 8°C (at 260°C) | 12°C (at 260°C) | 6°C (at 260°C) |
Natural convection | 15°C (at 120°C) | 13°C (at 120°C) | Not applicable | |||
Temp. Rise Time *¹ | Forced convection | ~70min. | ~105min. | ~100min. | ~60min. | ~100min. |
Natural convection | ~20min. | ~25min. | Not applicable | |||
Chamber / Exterior / Insulation | Stainless steel / Cold rolled steel paneling, chemical-proof baked-on finish / Glass wool | |||||
Door | Single swing (left side) | Double doors (opening from center) | ||||
Heater (Stainless Steel Tube) | 0.8kW | 0.6kWx2 | 0.83kWx2 | 1.35kWx2 | 1.65kWx2 | |
Wind Velocity Adjusting System | 10 steps (600~1500rpm) + Wind velocity (0) | 10 steps (600~1500rpm) | ||||
Damper | Circulation-Ventilation Manual switching: Interlocked intake and exhaust system (Complete exhaust applicable / Unable to reach 260°C with damper fully open) | |||||
Cable Port | Inner diameter: 33mm×1 (right side) | |||||
Exhaust Port | Outer diameter: 50mm×1 (back side) | Outer diameter: 50mm×2 (back side) | ||||
Inlet Port | Inner diameter: 33mm×1 (right side) | Inner diameter: 33mm×2 (both side) | ||||
Controller | Model V type | |||||
Temperature Control / Setting System | PID Z control / Digital setting with / keys | |||||
Temperature Display System | Temperature reading display: green 4-digit digital LED/Temperature setting display: orange 5-digit digital LED | |||||
Other Indications | LED indicates temperature patterns for heating/stabilizing/cooling | |||||
Timer | Fixed temperature operation, Program operation (maximum 99 steps or 99 patterns, with repeat operation function), Timer or clock operation function (Fixed temperature operation w/ auto start/auto stop/quick auto stop, program operation auto start) | |||||
Additional Functions | Variable Air Flow Function, Power-on Time and Operation Time Accumulation Monitor (up to 65,535 hours); Calibration Offset; Monitoring Display for Accumulated Power Consumption, Total CO 2 Emissions, and Heater Operation Output; Power Recovery Mode; Setting Data Backup and Recovery | |||||
Temperature Sensor | K type Thermocouple double sensor (for temperature control and independent overheat prevention device) | |||||
Heater Control | Triac with Zero-cross Control | |||||
Control Board | Self-diagnostic Functions (Detection for Temp. Sensor Failure, TRIAC Short Circuit, Automatic overheating prevention, Heater Line Disconnect, Main Relay Contact Damage ), Earth leakage breaker, Fan Motor Failure, Key Lock Function, Independent overheating prevention device | |||||
Earth Leakage Breaker | Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA | |||||
Door Switch | Door open: fan motor and heater circuit OFF, Door close: fan motor and heater circuit ON | |||||
Internal Dimensions (W×D×H Mm)*² | 300×300×300 | 450×450×450 | 600×500×500 | 600×500×1000 | 1090×500×1000 | |
External Dimensions (W×D×H Mm)*² | 430×495×740 | 580×645×890 | 730×695×940 | 730×695×1685 | 1220×695×1685 | |
Capacity | 27L | 90L | 150L | 300L | 540L | |
Weight | ~50kg | ~75kg | ~90kg | ~135kg | ~210kg | |
Number Of Shelf Bracket Step / Pitch | 6steps/30mm | 11 steps/30mm | 13 steps/30mm | 29 steps/30mm | ||
Withstand Load Of Shelf | 15kg/shelf | |||||
Power Supply V±10% 50/60Hz Single Phase | AC115V, 7.5A (with plug) with external transformer | AC115V 11A (with plug) AC220V 6A (no plug, round terminal) | AC115V 15A (with plug) AC220V 8A (no plug, round terminal) | AC220V 15.5A (no plug, round terminal) | AC220V 18.5A (no plug, round terminal) | |
Shelf Plate / Bracket | 2 pcs. / 4 pcs. | 4 pcs. / 8 pcs. | 8 pcs. / 16 pcs. | |||
*1. Temperature Accuracy / Rise time Standard: Testing Machinery Association of Japan. Temperature Fluctuation/Gradient Standard: Japanese Industrial Standard Performance data above based on 115V or 220V AC supplied power, 23°C±5°C (room temperature), 65%RH ±20% humidity, maximum air speed (FAN setting 10), damper closed, and no process load. *2. Protrusions excluded. |
Catalog Number | Description | Voltage |
DNF301 * | Energy Saving Programmable Forced Convection Oven 27L -with exernal transformer | 115V |
Energy Saving Programmable Forced Convection Oven 27L -with exernal transformer | 220V | |
Energy Saving Programmable Forced Convection Oven 90L | 115V | |
Energy Saving Programmable Forced Convection Oven 90L | 220V | |
Energy Saving Programmable Forced Convection Oven 150L | 115V | |
Energy Saving Programmable Forced Convection Oven 150L | 220V | |
Energy Saving Programmable Forced Convection Oven 300L | 220V | |
Energy Saving Programmable Forced Convection Oven 540L | 220V |
Jika Anda tertarik untuk memperoleh Discontinued items atau peralatan uji dan ukur lainnya, maka Alat-Test adalah mitra yang dapat Anda percayai! Kami menyediakan berbagai alat laboratorium dan uji untuk berbagai industri. Produk berkualitas tinggi kami telah membantu banyak perusahaan meningkatkan kontrol kualitas dan efisiensi produksi mereka.
Kami memiliki berbagai jenis Discontinued items dan peralatan uji lainnya yang dapat disesuaikan dengan kebutuhan Anda. Kami siap memberikan informasi lebih lanjut dan membantu Anda memilih peralatan yang paling cocok untuk bisnis Anda.

Hubungi Kami Sekarang!
Jangan ragu untuk menghubungi kami melalui salah satu cara berikut:
- Telepon: 02816572222
- Email: contact@alat-test.com
- Whatsapp: 085717112222
- Kontak Form: Klik di sini
Tim kami siap memberikan informasi lebih lanjut, memberikan penawaran khusus, dan membantu Anda menemukan solusi yang tepat untuk kebutuhan uji dan ukur Anda.
Jadi, jangan ragu untuk menghubungi Alat-Test sekarang juga! Kami adalah mitra yang handal untuk kebutuhan peralatan uji dan ukur Anda. Dengan bantuan kami, Anda dapat meningkatkan kualitas produk Anda dan mencapai keberhasilan yang lebih besar dalam bisnis Anda. Terima kasih telah membaca, dan kami berharap dapat bekerja sama dengan Anda segera! ️